Milwaukee M18 FUEL 16" Chainsaw Kit (2727-21HD): Gas-Class Power, No Gas Required

When a storm drops trees across a Twin Cities jobsite or a clearing crew in northern Wisconsin needs to get through brush before framing starts, the chainsaw in the truck either performs or it doesn't. The Milwaukee M18 FUEL 16" Chainsaw Kit (2727-21HD) is built for exactly that kind of work. This Milwaukee chainsaw runs on M18 battery power and delivers performance equivalent to a 40cc gas engine without the fuel, the maintenance, or the pull cord.

What's in the 2727-21HD Kit

The 2727-21HD is the complete kit version of Milwaukee's M18 FUEL chainsaw. It ships with:

• M18 FUEL 16" Chainsaw (2727-20)
• REDLITHIUM HIGH OUTPUT HD12.0 battery pack
• M18 & M12 Multi-Voltage charger
• Bar scabbard
• Bar and chain lubricant

The HD12.0 battery is Milwaukee's largest M18 pack, and pairing it with this Milwaukee chainsaw isn't arbitrary, it's the combination that gets you up to 150+ cuts per charge through 6-inch pine. For storm cleanup or site clearing in Minnesota and Wisconsin conditions, that runtime is the difference between finishing a job and making a second trip.

Why This Milwaukee Chainsaw Cuts Differently

POWERSTATE Brushless Motor - Gas-Equivalent Performance

Most battery chainsaws give up power partway through a cut or bog down in hardwood. The POWERSTATE brushless motor in the M18 FUEL is engineered to match the output of a 40cc gas engine, and it maintains that output through the full depth of the cut. Whether you're working through oak that fell in a storm or cutting lumber on a demolition prep job, this Milwaukee chainsaw doesn't lose speed mid-cut the way lower-tier cordless saws do.

For framing and roofing contractors across the Twin Cities, Superior, and Altoona markets, that performance level justifies the step up from a consumer-grade battery chainsaw.

REDLINK PLUS Intelligence - Protection Built In

The Milwaukee chainsaw integrates REDLINK PLUS technology throughout the tool-battery-charger system. This means the electronics are monitoring temperature, overload conditions, and battery state in real time, and they'll act before anything gets damaged. Included in that package is an electronic chain brake. A faster, more reliable stop than a standard mechanical brake when kickback occurs.

On a solo storm cleanup job, working at odd angles on a downed tree, that protection matters in a way it doesn't when you're 30 feet from your crew.

150+ Cuts Per Charge on the HD12.0

Runtime is where a lot of Milwaukee chainsaw users are pleasantly surprised. The HIGH OUTPUT HD12.0 delivers consistent power through a full charge cycle rather than tapering off toward the end. In real field conditions, cutting mixed-diameter storm debris, green wood, branches, and trunk sections. Most users are getting 1.5 to 2+ hours of intermittent cutting before needing a recharge. The included multi-voltage charger refills the HD12.0 significantly faster than a standard M18 charger, so a recharge during a lunch break gets you right back into it.

Your M18 Investment Goes Further

If your crew already runs Milwaukee M18 tools, drills, impact drivers, circular saws, recip saws, and more, the HD12.0 battery in this Milwaukee chainsaw kit is fully interchangeable with everything else on the platform. You're not buying into a separate outdoor power system. The battery that powers your Milwaukee chainsaw in the morning charges back up and runs a drill in the afternoon.

That's a practical cost advantage over gas-powered alternatives, where the saw requires its own fuel supply, its own maintenance cycle, and its own storage considerations.

Auto-Oiler with Sight Window

The Milwaukee chainsaw's automatic bar and chain oiler keeps lubrication consistent throughout the cut without manual intervention. More practically, there's a transparent reservoir window that lets you check oil level at a glance before you start. On a busy jobsite or during multi-stop storm cleanup work, that quick visual check helps avoid the chain wear that comes from starting dry.

Where This Saw Earns Its Keep

Storm Cleanup: In Minnesota and Wisconsin, spring and summer storms regularly take down mature trees across residential properties, commercial sites, and job corridors. A Milwaukee chainsaw that's ready to run the moment you arrive on site; no fuel mixing, no carb issues from sitting in a truck, it keeps cleanup efficient.

Site Prep and Land Clearing: Framing and roofing contractors who need to drop a tree or clear overgrowth before breaking ground don't want to haul a gas saw just for that. The M18 FUEL chainsaw is compact enough to carry alongside standard M18 tools and powerful enough to handle site clearing work without compromise.

Renovation and Demolition Work: Cutting through structural lumber, roof framing, or debris during a teardown goes faster with a chainsaw. The Milwaukee M18 FUEL handles this rough-use work without the carb fouling or stale fuel problems that plague gas saws that sit between jobs.

Tree Service and Landscaping Crews: For noise-sensitive residential work across the Twin Cities metro, a Milwaukee cordless chainsaw reduces complaints and keeps the work environment cleaner. Battery-powered also means no exhaust in tight spaces or enclosed areas during early-stage site work.

Specifications