Metabo HPT Cordless Pneumatic Framing Nailers: Now Available at Polar Tool and Supply

Cordless framing nailers have come a long way, but until recently there was always a performance gap between cordless and pneumatic. Gas cartridge systems added cost and complexity. Battery-powered nailers were convenient but could not match the firing speed of a compressor-driven tool. Framing crews had to choose between the freedom of cordless and the output of pneumatic.

Metabo HPT built a new category to close that gap: Cordless Pneumatic. Polar Tool and Supply now carries both models in the NR1890 series, and after 18 years of selling framing nailers to contractors across Minnesota and Wisconsin, this is one of the more significant product introductions we have seen in the category.

What Is Metabo HPT Cordless Pneumatic?

The Cordless Pneumatic platform centers on Metabo HPT’s Air Spring Drive Plus system, which delivers pneumatic-level firing speed from a battery-powered tool. There is no gas cartridge, no hose, and no compressor required. The tool fires up to 6 nails per second, which matches the output of a traditional pneumatic framing nailer.

The included 18V/36V 10/5.0Ah MultiVolt T-PWR Tabless battery provides up to 1,170 nails per charge. For most framing applications, that is enough runtime to push through a productive day without stopping to swap batteries.

The result is a cordless framing nailer that does not ask crews to give up speed for convenience or convenience for speed.

Two Models: 21-Degree and 30-Degree

Polar Tool carries both configurations. The right choice depends on the nail type your jobs require and the framing situations your crew works in most often.

Metabo HPT 18V 21-Degree Cordless Pneumatic Framing Nailer (NR1890DRBQRY)

The 21-degree model accepts full round head nails from 2 to 3-1/2 inches in length, with shank diameters from .113 to .148 inch.

Full round head nails are specified by many building codes for structural shear wall framing and hurricane-rated connections. If your jobs include work with strict fastener code requirements, the 21-degree configuration is the appropriate choice.

The tool weighs 7.9 lbs without the battery and shares the same Air Spring Drive Plus system, 6 nails per second firing rate, and 1,170-nail runtime as its 30-degree counterpart.

Key specs:

• Nail angle: 21 degrees
• Nail type: Round head (plastic strip collation)
• Nail length: 2 to 3-1/2 inches
• Shank diameter: .113 to .148 inch
• Tool weight: 7.9 lbs
• Firing rate: Up to 6 nails per second
• Runtime: Up to 1,170 nails per charge

Metabo HPT 18V 30-Degree Cordless Pneumatic Framing Nailer (NR1890DCBQRY)

The 30-degree model accepts clipped and offset round head nails from 2 to 3-1/2 inches in length, with shank diameters from .113 to .131 inch.

The 30-degree magazine angle is more compact, which improves access in tight framing situations where the 21-degree magazine can get in the way. Crews who do a lot of close-quarter framing, complex corners, or stair framing often prefer the 30-degree for that reason.

At 7.7 lbs, the 30-degree model is slightly lighter than the 21-degree version. Before specifying clipped head nails on permitted work, verify your local building code accepts them for the application. Some codes restrict clipped head nails for structural shear wall connections.

Key specs: 

• Nail angle: 30 degrees
• Nail type: Clipped or offset round head (paper strip collation)
• Nail length: 2 to 3-1/2 inches
• Shank diameter: .113 to .131 inch
• Tool weight: 7.7 lbs
• Firing rate: Up to 6 nails per second
• Runtime: Up to 1,170 nails per charge

What Both Models Share

Both the 21-degree and 30-degree Metabo HPT cordless framing nailers include:

·      Air Spring Drive Plus system for pneumatic-speed performance

·      Up to 6 nails per second firing rate

·      1,170 nails per charge with the included MultiVolt battery

·      Tool-less depth adjustment

·      Integrated LED light

·      Bump fire and sequential mode switching via the control panel

·      Extended magazine for fewer reloads

·      Swappable magazines for different applications

·      Rafter hook and belt hook included

·      Lifetime tool body warranty, 2-year battery warranty, 1-year charger warranty

·      Includes the 18V/36V 10/5.0Ah MultiVolt T-PWR Tabless battery and quick charger

Which Metabo HPT Cordless Framing Nailer Is Right for Your Crew?

Choose the 21-degree (NR1890DRBQRY) if:

• Your jurisdiction requires full round head nails for structural framing or shear wall connections
• You run jobs that follow strict fastener specifications for permitted work
• Your nail supply is already stocked with 21-degree round head collation

Choose the 30-degree (NR1890DCBQRY) if:

• You do a lot of tight-space framing where magazine clearance matters
• Your code does not restrict clipped head nails for your typical applications
• You want the lightest possible tool for overhead and extended use
• You currently run 30-degree pneumatic nailers and want to keep the same nail supply

If you are not sure which angle your jurisdiction requires, check with your local building department or the plans for your specific project before committing to a collation type.

Frequently Asked Questions

What makes Metabo HPT Cordless Pneumatic different from other cordless framing nailers? The Metabo HPT Cordless Pneumatic nailers use the Air Spring Drive Plus system to deliver a firing rate of up to 6 nails per second, which matches traditional pneumatic nailer output. Most other cordless framing nailers on the market fire at slower rates. Metabo HPT designed this as a category of its own: pneumatic speed without the compressor, hose, or gas cartridge.

Do the Metabo HPT NR1890 nailers require a compressor?

No. Both the 21-degree and 30-degree models run entirely on the included 18V/36V 10/5.0Ah MultiVolt T-PWR Tabless battery. No compressor, hose, or gas cartridge is required.

How many nails can I drive on a single charge?

Both models provide up to 1,170 nails per charge using the included MultiVolt battery.

What is the difference between 21-degree and 30-degree framing nailers?

The degree refers to the angle of the nail magazine. A 21-degree nailer uses full round head nails, which many building codes require for structural applications. A 30-degree nailer uses clipped or offset round head nails and has a more compact magazine that improves access in tight framing situations. The right choice depends on your local code requirements and the type of work your crew does.

Where can I buy the Metabo HPT Cordless Pneumatic framing nailer in Minnesota or Wisconsin?

Polar Tool and Supply carries both the 21-degree and 30-degree Metabo HPT Cordless Pneumatic framing nailers. We have locations in Gem Lake, MN; Superior, WI; and Altoona, WI, with free jobsite delivery within 50 miles of each store, including direct jobsite delivery. Shop online at polartool.us.

Shop the Metabo HPT Cordless Pneumatic Framing Nailers at Polar Tool

Both models are available now at Polar Tool and Supply. Whether you need the full round head 21-degree configuration for code-specific work or the compact 30-degree magazine for tighter framing situations, we have the tool that fits your jobs.

Order online or stop into any of our three locations. Free jobsite delivery within 50 miles of Gem Lake, MN; Superior, WI; and Altoona, WI.